您好!欢迎来到东莞市圣杰自动化机械科技有限公司!

产品中心

PRODUCTS

RCA550 automatic assembly machine production line

  • RCA550 automatic assembly machine production line
  • RCA550 automatic assembly machine production line
RCA550 automatic assembly machine production line
  • Product Details

Equipment Name: RCA550 automatic assembly machine production line

Power source: AV220V 50-60HZ

Air pressure: >0.5Mpa

Chassis size: 1600*650*750(mm)*3

Equipment capacity: 1650Pcs/H

Device Description

1. The equipment adopts the cylinder as the power, the control system is the PLC programmable controller, and the intuitive substation assembly working principle;

2. This equipment consists of two plug-in terminal machines and an automated assembly production line consisting of a meson table.

3. The copper sleeve and the color ring are loaded by vibrating plate method;

4. Install the safety cover on the whole machine to avoid unnecessary accidents during operation and be more neat and tidy;

5. Automatic sound and light alarm and stop when a fault occurs, and display the fault station;

6. Automatic counting, output setting; using man-machine interface, the interface is intuitive, the operation is simple and safe.


Type and introduction of audio interface

Type and introduction of audio interface (5 categories)

In addition to high-definition video, not only the visual impact, but also the quality of audio has been greatly improved, which can bring you more realistic scene effects.

fruit. The current mainstream audio interfaces are as follows

RCA analog audio

 The RCA connector is often referred to as the Lotus Head. The use of RCA cables to transmit analog signals is currently the most common audio connection. Each RCA cable is responsible for transmitting the audio signal of one channel, so a stereo signal requires a pair of cables. For multi-channel systems, the same number of cables are required depending on the actual number of channels. Stereo RCA audio interface, generally the right channel is marked in red, and the left channel is marked in blue or white.

S/PDIF

 S/PDIF (Sony/Philips Digital Interface, Sony and Philips Digital Interface) is a digital audio output interface jointly developed by SONY and PHILIPS. This interface is widely used in CD players, sound cards and home appliances to improve the sound quality of CDs and give us a more pure auditory effect. This interface transmits digital signals, so it does not suffer from interference like analog signals and degrades audio quality. It should be noted that the S/PDIF interface is a standard, and both the coaxial digital interface and the optical interface belong to the S/PDIF interface.

Digital coaxial

 Digital Coaxial is an interface that outputs digital audio using the S/PDIF interface. The coaxial cable has two concentric conductors, and the conductor and the shield share the same axis. The coaxial cable is a copper wire conductor isolated by an insulating material with an impedance of 75 ohms. On the outside of the inner insulating material is another layer of ring conductor and its insulator. The entire cable is sheathed of polyvinyl chloride or Teflon material. Wrap it up. The advantage of coaxial cable is resistance

Anti-stable, high transmission bandwidth, guarantees the quality of audio. Although the standard connector of the coaxial digital cable is a BNC connector, the coaxial digital wire on the market mostly uses an RCA connector.

optical fiber

 Optical transmission of digital signals in the form of optical pulses is based on glass or plexiglass. The fiber also uses the S/PDIF interface output, which has high bandwidth and low signal attenuation. It is often used to connect DVD players and AV amplifiers, and supports PCM digital audio signals, Dolby and DTS audio signals.

XLR interface

 The way the RCA analog audio cable transmits sound directly is different. The Balanced Analog Audio interface uses two channels to transmit signals with the same signal and opposite phases. The receiving device subtracts the two sets of signals, and the interference signal is cancelled out, thereby obtaining a high quality analog signal. Balanced analog audio typically uses an XLR interface and a large three-pin interface. The XLR, commonly known as the card head, consists of a three-pin plug and a locking device. Thanks to the locking device, the XLR connection is quite secure. The large three-core interface uses a 6.35 mm diameter plug, which has the advantage of being wear resistant and suitable for repeated insertion and removal. Balanced analog audio connections are found primarily in advanced analog audio equipment or professional audio equipment.

 

In life, in addition to the visual impact of high-definition video, there is a higher demand, and the audio quality is greatly improved, so as to bring more realistic scene effects to everyone. And our device is one of the five audio interface RCA analog audio.


上一页
下一页